Metrohm viva 1.1 (ProLab) User Manual
Page 363
■■■■■■■■■■■■■■■■■■■■■■
4 Database
viva 1.1 (for process analysis)
■■■■■■■■
351
Editable only when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value
-1.00E+12
End value
End value for scaling the y1 axis.
Editable only when autoscaling is disabled.
Input range
-1.00E+12 - +1.00E+12
Default value
+1.00E+12
Curve
Curve color
Selection of the color for the line of the curve.
Selection
13 colors | light blue
Default value
light blue
MEAS T
Selection
13 colors | dark blue
Default value
dark blue
Symbol
Selection of the symbol for the display of the individual measuring points.
Selection
● | ╳ | ✸ | ■ | ▲ | no symbol
Default value
no symbol
no symbol
Measuring points are not shown.
NOTE
The individual measuring points are no longer displayed for curves for
which the distance between two measuring points is smaller than 5 pix-
els, even if a symbol has been selected. In this case, the graphics win-
dow might be enlarged in order for the symbols to be displayed again.
Symbol color
Selection of the color for the measuring point symbol.
Selection
13 colors | light blue
Default value
light blue