Metrohm viva 1.1 (ProLab) - Manual (Page 588)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
576 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
descending
The valve moves towards the target port in descending direction.
automatic
The valve determines the shortest path to the target port on its own.
not over
The valve moves towards the target port in such a way that the port
specified in the parameter Not over will not be traversed.
Not over
Selection of the port that is not to be traversed when the port is changed.
This parameter can be edited only if Rotating direction = not over.
Input range 1 - 12
Default value 1
5.5.2.9 Track commands
5.5.2.9.1 Track commands - Overview
Menu item: Method ▶ Insert ▶ New track...
The following track commands exist for the various tracks:
￭ START
Start command for main track (see Chapter 5.5.1.2.1, page 399).
￭ TRACK
Start command for normal track (see Chapter 5.5.1.2.2, page 400).
￭ VA TRACK
Start command for VA track (see Chapter 5.5.1.2.3, page 401).
￭ SERIES START
Start command for series start track (see Chapter 5.5.1.2.4, page 402).
￭ SERIES END
Start command for series end track (see Chapter 5.5.1.2.5, page 402).
￭ EXIT
Start command for exit track (see Chapter 5.5.1.2.6, page 403).
￭ ERROR
Start command for error track (see Chapter 5.5.1.2.7, page 404).
5.5.2.9.2 START
5.5.2.9.2.1 START - Overview
Dialog window: Method ▶ START ▶ Properties... ▶ START - 'Command name'
Start command for the main track.
Appearance
The command has the following appearance: