Metrohm viva 1.1 (ProLab) - Manual (Page 602)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
590 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Parameters
Command name
Name of the command.
Entry 1 - 25 characters
Default value Exit track
Live display
on | off (Default value: on)
If this check box is activated, then the track will be displayed in the live
display.
Command variables
The following command variables are generated by the command EXIT in
the method run and can be used in formulas under the designation 'Com-
mand name.Variable identification':
Identifi-
cation Description
BSY Command status:
1 = BUSY, HOLD or ERROR
0 = READY
invalid (variable not available) = Command has never
been started
FIN Command status:
1 = Command has ended at least once
0 = Command has not yet ended
invalid (variable not available) = Command has never
been started
5.5.2.9.8 ERROR
Dialog window: Method ▶ ERROR ▶ Properties... ▶ ERROR - 'Command name'
Start command for the error track.
Appearance
The command has the following appearance: