3 editing the standard – Metrohm viva 1.1 (ProLab) User Manual
Page 677
■■■■■■■■■■■■■■■■■■■■■■
5 Method
viva 1.1 (for process analysis)
■■■■■■■■
665
5.6.4.3
Editing the standard
Dialog window: Method
▶ Evaluation ▶ Standards ▶ Standards ▶ [Edit] ▶ New.../
Properties...
▶ Standard
The standard selected in the table can be edited in the Standard dialog
window.
Standard
Name of the standard.
Entry
25 characters
'Substance' (value)
Concentration value of the substance in the selected standard.
Input range
0.000 - 9,999.999
Default value
1.0
'Substance' (unit)
Concentration unit of the substance in the selected standard.
Selection
g/L | mg/L | µg/L | ng/L | mol/L | mmol/L |
µmol/L | nmol/L | pmol/L | mL/L | µL/L | nL/L
Default value
mL/L
Applies the field content of the selected substance (value or unit) for all
subsequent substances.
Navigation bar
Navigation bar for changing the displayed standard with the following
functions:
Jump to the first standard solution. Altered data is adopted.
Jump to the previous standard solution. Altered data is adopted.
Jump to the next standard solution. Altered data is adopted.
Jump to the last standard solution. Altered data is adopted.