Metrohm viva 1.1 (ProLab) - Manual (Page 176)

3.8 Live display subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
164 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Measured value 3
Selection of the measured value for measured value display 2. The mea-
sured quantities and the default value depend on the Command type
selected.
CVS
Selection
Current | Potential | Time | Time to finish | Cur-
rent measuring range | off
Default value Time
CPVS
Selection
Current | Potential | Time | Time to finish | Cur-
rent measuring range | off
Default value Time
CP
Selection
Current | Potential | Time | Time to finish |
Potential measuring range | off
Default value Time
MEAS T
Selection
Time | dT/dt | Temperature | off
Default value off
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | dε/dt |
Calculated 1 - 3 | External 1 - 3 | off
Default value Transmission
MEAS TMF
Selection
Time | Measured value | Transmission | Tem-
perature | dε/dt | off
Default value Time
Curve display
on | off (Default value: on)
If this check box is activated, then the required curves are displayed in the
Live display subwindow.
x Axis
Selection of the quantity shown on the x axis.