Metrohm viva 1.1 (ProLab) - Manual (Page 362)

4.6 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
350 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
For MEAS Ref
Selection
Wavelength [nm] | Intensity [Counts] | Inten-
sity Dark [Counts] | Transmission [%] | Satura-
ted pixels
Default value Intensity [Counts]
For MEAS Spec
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels
Default value Absorbance [mAU]
For MEAS Opt
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Temper-
ature [°C] | d
ε/dt [mAU/min] | Calculated 1 - 3 |
External 1 - 3
Default value Measured value
MEAS T
Selection
Time | dT/dt | Temperature
Default value Temperature
For CAL Spec
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels
Default value Intensity [Counts]
For MEAS TMF
Selection
Time [s] | Measured value [mAU] | Transmis-
sion [%] | Temperature [°C] | dε/dt [mAU/min]
Default value Measured value [mAU]
Label
Freely definable axis label for the y1 axis. If auto is selected, then the des-
ignation from the Quantity field will be used.
Selection 50 characters | auto
Default value auto
Scaling
Start value
Initial value for scaling the y1 axis.