Metrohm viva 1.1 (ProLab) - Manual (Page 420)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
408 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
￭ CALL VA
Calling VA tracks.
￭ CALL VMS
Calling VA tracks for calculating the VMS value.
￭ CONTROL
Command for controlling Beckhoff instruments.
￭ CP
Electroplating bath analysis with CP (chronopotentiometry or open-cir-
cuit potential measurements).
￭ CPVS
Electroplating bath analysis with CPVS (Cyclic Pulse Voltammetric Strip-
ping).
￭ CTRL
Setting remote output lines.
￭ CVS
Electroplating bath analysis with CVS (Cyclic Voltammetric Stripping).
￭ DIGITAL IN
Loading digital inputs.
￭ DIGITAL OUT
Actuating digital outputs.
￭ EMPTY
Empties a dosing unit.
￭ ERROR
Start command for the error track.
￭ EXIT
Start command for the exit track.
￭ HEATER
Controlling the heater.
￭ LIFT
Moves to a lift position.
￭ LOOP
Multiple execution of method parts.
￭ LQH
Extensive dosing possibilities with a Dosino.
￭ MEAS Opt
Measuring the absorbance.
￭ MEAS Opt Conc
Measuring the concentration (direct measurement).
￭ MEAS Ref
Measuring the reference spectrum.
￭ MEAS Spec
Measuring the sample spectrum.
￭ MEAS T
Measuring the temperature.
￭ MEAS TMF
Determining the transmission factor.