Metrohm viva 1.1 (ProLab) - Manual (Page 568)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
556 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Function
Action
Selection On | Off | Timer | Set default value
Default value Timer
On
Sets the digital output to On after expiration of Start delay.
Off
Sets the digital output to Off after expiration of Start delay.
Timer
Sets the digital output to On after expiration of Start delay and back
again to Off after expiration of Working time.
Set default value
Resets the digital output to the default value in the configuration.
Start delay
Waiting time in seconds or minutes until the triggered action is started.
Input range 0 - 214783647
Default value 0
Selection s | min
Default value s
Working time
The time for which the digital output is set to active can be specified in
seconds or minutes for Action = Timer. After the working time has
elapsed, it is set to inactive again.
Input range 0.01 - 999,999
Default value 0
Selection s | min
Default value s
End delay
Waiting time after the working time has expired.
Input range 0 - 214783647
Default value 0
Selection s | min
Default value s