Metrohm viva 1.1 (ProLab) - Manual (Page 996)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
984 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Graphical display
8.4.6.5 Analog outputs
8.4.6.5.1 Analog outputs - Overview
Program part: Manual control
If the Analog outputs branch is selected in the device list, then all out-
puts can be commonly controlled in the Functions/Parameters subwindow
on the Set value and Set default tabs.
In the subwindow for the graphical display the current value for all con-
nected analog outputs is shown in their physical order.
Set value
Value
Entry of the value in % of the mapped range.
Input range 0.0 - 100.0 % mapping
Default value 0.0 % mapping
[Set]
Sets all analog outputs to the indicated mapping value.
Set default
[Set]
Resets all analog outputs to the default value in the configuration.
Graphical display
Example: