Metrohm viva 1.1 (ProLab) - Manual (Page 753)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 741
User
Short name of the new user that must be used to log in at program start.
After the name has been entered, a Start password must be issued for
the user to be entered in the user list.
Entry 24 characters
6.2.1.3.3 Setting a start password
Dialog window: Configuration ▶ Tools ▶ User administration... ▶ [Set start pass-
word] ▶ Start password
A start password can be assigned for the selected user with the [Set start
password] button in the User administration dialog window. It is
active only for newly created users or for those who have had their status
set to enabled again. The Start password dialog window opens.
Start password
Entry of a new start password. Password options are not used for the start
password.
Entry 50 characters
Confirm password
Confirmation of the start password.
Entry 50 characters
6.2.2 Security settings
6.2.2.1 Security settings
Dialog window: Configuration ▶ Tools ▶ Security settings
Overview
With client/server systems, the security settings are globally valid for all
connected clients.
Security settings can be exported and imported. This means that these set-
tings can be exchanged between different client/server systems.
The security settings can be output as a PDF file with the File ▶ Print
(PDF)... ▶ Security settings menu item.
Login policies
Enforce login with user name
on | off (Default value: off)
If this check box is activated, then each time the program starts the login
window will appear, in which the user must enter his or her user name. If
this check box is deactivated, no login is necessary and the user logged