Metrohm viva 1.1 (ProLab) - Manual (Page 147)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 135
Duplicate Duplicates the selected line(s). The new lines are inserted below the selected
range.
Mark lines Marks the selected lines with a red background for the line number. Before the
start of such a line, the corresponding actions defined under Properties on the
Process tab (see Chapter 3.3.2.4, page 106) will be triggered.
Unmark lines Removes the line marking for the selected lines.
Set lines inexecuta-
ble Sets the selected lines to "inexecutable", i.e., these lines will not be executed in
the run. Such lines are struck through with a red line.
Set lines executable Sets the selected lines to "executable", i.e., they will be executed in the run.
[Sample table] contains the following menu items:
New Loads a new, empty sample table.
Load... Load a saved sample table into the working sample table.
Save Saves the current sample table under the same name.
Save as... Save the current sample table under a new name.
Sample table test... Checks whether all sample data in the working sample table is correct (see
Chapter 3.3.1.7, page 99).
Print (PDF)... Outputs the working sample table as PDF file.
Properties... Set the properties of the working sample table.
Import data... Import a sample table from a file with the format *.csv.
Reset Resets lines that have been processed, i.e., they can be edited again.
Moving lines with drag and drop
The lines selected in the working sample table can be moved to an
opened sample table via drag and drop.
Copying lines with drag and drop
The lines selected in the working sample table can be copied to an
opened sample table with drag and drop by pressing the Ctrl key.