Metrohm viva 1.1 (ProLab) User Manual
Page 329
■■■■■■■■■■■■■■■■■■■■■■
4 Database
viva 1.1 (for process analysis)
■■■■■■■■
317
Show evaluation lines
on | off (Default value: off)
If this check box is activated, then the evaluation lines (tangents, auxiliary
lines) will be shown.
Tangents
Selection of the color for the tangent lines and evaluation lines.
Selection
13 colors | light green
Default value
light green
Auxiliary lines
Selection of the color for the auxiliary lines.
Selection
13 colors | blue
Default value
blue
Curve properties measuring commands - Measuring point list
Tab: Workplace / Database
▶ Curves # ▶ Properties Curves # ▶ Measuring point
list
Parameters for the display of the measuring point list.
Available columns
Shows all fields that can be displayed as columns in the measuring point
list. The display depends on the command type.
Displayed columns
Shows all fields that will be displayed as columns in the measuring point
list.
Adds the selected column to the measuring point list.
Removes the selected column from the measuring point list.
Changes the sequence of displayed columns by moving the selected col-
umn up and down.