Metrohm viva 1.1 (ProLab) - Manual (Page 367)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 355
Grid color
Selection of the color for the grid lines.
Selection 13 colors | gray
Default value gray
Background
Background color
Selection of the color for the curve background.
Selection 13 colors | white
Default value white
Show end points
on | off (Default value: off)
If this check box is activated, then the endpoints found will be shown on
the curve with the ♦ symbol and labeled with BP# (break point), FP#
(fixed point), MI (minimum value) or MA (maximum value).
Automatic EPs
Selection of the color for automatically set endpoints.
Selection 13 colors | black
Default value black
Show evaluation lines
on | off (Default value: off)
If this check box is activated, then the evaluation lines (tangents, auxiliary
lines) will be shown.
Tangents
Selection of the color for the tangent lines and evaluation lines.
Selection 13 colors | light green
Default value light green
Auxiliary lines
Selection of the color for the auxiliary lines.
Selection 13 colors | blue
Default value blue