Metrohm viva 1.1 (ProLab) User Manual

Page 469

Advertising
background image

■■■■■■■■■■■■■■■■■■■■■■

5 Method

viva 1.1 (for process analysis)

■■■■■■■■

457

NOTE

If the sample is to be added with a dosing device, then it is mandatory
that either the Sample amount be added as volume or that a Analyt-
ical volume
be defined, otherwise an error message will appear in the
run.

Message
With manual addition, the running of the track in which the command is
located is stopped and a message is displayed.

Only editable for Addition = Add manually, otherwise disabled (includ-
ing text input field).

Selection

Display standard message | Display message
defined by the user

Default value

Display standard message

Display standard message
If this check box is activated, then the standard message for additions
will be displayed.
Display message defined by the user
If this check box is activated, then the message defined in the text field
will be displayed.

Dosing device
Parameters for automatic dosing. This section is displayed only when
Addition = Add with dosing device.

Dosing unit

Selection of the dosing unit with which the sample solution is to be dosed
in.

Selection

'Name of the dosing unit' | not defined

Default value

not defined

'Name of the dosing unit'
Alphabetically organized selection of the dosing units from the table of
dosing units in the configuration.
not defined
The dosing unit must be assigned with not defined by the user at the
start of the method.

Advertising