10 io controller, 1 io controller - overview, Establishing a connection with the barcode reader – Metrohm viva 1.1 (ProLab) User Manual
Page 918: 10 io controller 7.10.1, Io controller - overview, Io controller
7.10 IO controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
906
￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Selection
Document message only | Display and docu-
ment message | Do not start the determina-
tion
Default value
Display and document message
Document message only
The message that the validity period has expired will be automatically
saved with the determination.
Display and document message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the
determination.
Do not start the determination
The determination is not started. The following message must be con-
firmed with [OK].
7.9.6
Establishing a connection with the barcode reader
Dialog window: Configuration
▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
▶ Settings ▶ [Connect] ▶ Establish connection
In order to test the connection with a barcode reader, click on the [Con-
nect] button on the Settings tab.
If a barcode is then scanned with the barcode reader, the data received
will be entered in the following fields:
Barcode reader ID
Identification of the barcode reader.
Data
Read-in data.
7.10
IO controller
7.10.1
IO controller - Overview
Dialog window: Configuration
▶ Devices ▶ [Edit] ▶ Properties ▶ Properties - 'De-
vice type' - 'Device name'
The properties of an IO controller are set on the following tabs:
￭
(see Chapter 7.10.2, page 907)
General device information such as device name, device type, serial
number, etc.
￭
(see Chapter 7.10.3, page 908)
General settings for the IO controller.