Metrohm viva 1.1 (ProLab) - Manual (Page 804)

6.7 Sensors/electrodes subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
792 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
6.7 Sensors/electrodes subwindow
6.7.1 Sensors/electrodes - General
Subwindow: Configuration ▶ Sensors/Electrodes
Sensors/electrodes subwindow
The Sensors/Electrodes subwindow contains the sensor table with all
manually added sensors and electrodes. It can be shown in the Configu-
ration program part as a part of the configuration view or (if not present
in the user interface) in a separate window with View
▶ Quick access.
The subwindow can be enlarged and reduced as required; it can also be
maximized.
Standard sensors
By default, the sensor table contains the following sensors and electrodes
which cannot be deleted:
￭ Auxiliary electrode (auxiliary electrode)
￭ RDE (rotating disk electrode)
￭ Reference electrode (reference electrode)
￭ Temperature sensor (temperature sensor)
6.7.2 Sensor table
6.7.2.1 Sensor table
Subwindow: Configuration ▶ Sensors/Electrodes
Contents
The following information about the configured sensors is displayed as the
default settings in the sensor table:
Sensor name
Name of the sensor.
Sensor type
Type of the sensor.
Device name
Name of device to which the sensor is connected.
Set to work
Date on which the sensor was set to work for the first time.