Metrohm viva 1.1 (ProLab) - Manual (Page 989)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 977
ACTIVE INACTIVE ERROR
Display flashes
8.4.6.3 Digital outputs
8.4.6.3.1 Digital outputs - Overview
Program part: Manual control
If the Digital outputs branch is selected in the device list, then all out-
puts can be commonly controlled in the Functions/Parameters subwindow
on the Switch on/off and Set default tabs. The status of all connected
digital outputs is shown in their physical order in the subwindow for the
graphical display.
Switch on/off
[Start]
Sets all digital outputs to ACTIVE.
[Stop]
Sets all digital outputs to INACTIVE.
Set default
[Set]
Resets all digital outputs to the default value in the configuration.
Graphical display
Example: