Metrohm viva 1.1 (ProLab) - Manual (Page 923)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 911
Assigned ports
Selection of an output port assigned to an input port. The signal of the
output port depends on the signal of the input port.
Only active and editable for the port types Level detector and Leak
detector.
Selection
All digital outputs
NOTE
Digital outputs of the Type = Alarm signal cannot be selected.
Signal
Selection of the value which the signal on the output port should have.
Only active and editable for the port types Level detector and Leak
detector.
Selection
Input signal | Invertet input signal
Default value Input signal
Signal processing
Delayed edge
The input signal will only be recorded with a delay time on the rising or
falling edge.
Selection ascending | descending
Default value descending
Delay time
Time that has to elapse before the input signal on the rising or falling
edge is recorded.
Input range 0 - 214,783,647
Default value 0
Invert signal
on | off (Default value: off)
If this check box is activated, then the input signal received will be inver-
ted.
Message
Only active and editable for Type = Level detector.