Rockwell Automation 5370-CVIM2 Module - Manual (Page 102)

Chapter 4
Inspection Configuration
4–16
Selecting Display Parameters
The Display setup panel is accessible from the Configuration Editor panel,
as shown in Figure 4.11, by picking the button.
Figure 4.11 Selecting Display Panel
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
Here is a brief description of each parameter field in the Display panel:
•
Freeze Mode –– This parameter determines the default image “freeze”
mode that prevails when an inspection tool failure or other “reject”
condition occurs during online operations: display all camera images
regardless of reject condition; pause the reject image for n seconds (where
n = 1 to 30 seconds); freeze first n rejects; and freeze last n rejects (where
n is the number of reject images that the reject queue can hold).
The freeze mode operations are described in detail in Chapter 10,
Environment Menu Selections, starting on page 10–16.