Rockwell Automation 5370-CVIM2 Module - Manual (Page 140)

Chapter 5
Pick and Place Function
5–10
Figure 5.9 Example: Using Pick and Place to Alter a Rectangular Window
•
•
D
D
′
A
Step 2: Pick the window
at the center (point A)
and drag the entire
window to point A ′.
A
′
Step 1: Pick the
window at point D and
drag it to point D
′.
Note that all four of the corner pick and place points operate the same way:
The picked corner can be dragged around the image field, along with the two
adjacent sides, while the opposite corner remains anchored.