Rockwell Automation 5370-CVIM2 Module - Manual (Page 74)

5 Chapter Chapter 3
Image Acquisition Parameters
3–35
Figure 3.25 Example: Effect of Different Acq.Pixels Settings on Displayed Image
Acq. Pixels =
512
Acq. Pixels =
64
Acq. Pixels =
640
Acq. Phase =
0 (all)
Acq. Phase (Pixels) –– The acquired pixels are normally centered within the
camera’s field of view (centered on pixel 320 out of 640). By changing the
value of the
Acq. Phase (Pixels) parameter, you can shift the center of the
acquired region left or right. Normally, the default setting of 0 is appropriate;