Rockwell Automation 5370-CVIM2 Module - Manual (Page 324)

Chapter 7
Inspection Tools
7–86
Figure 7.68 Example: Occurrence of “Tool Outside” Message
AOI#1 for
Tool 2
Image from
Tool 1 (P1)
When the “tool outside” message appears, continue by picking the button
in the message box and the button in the tool edit panel. When you
do, the “tool modified” message appears, as shown in Figure 7.69.
Figure 7.69 Example: Occurrence of “Tool Modified” Message
Image from
Tool 1 (P1)
When the “tool modified” message appears, continue by picking the
button in the message box. When you do, the AOI#1 window, now “modified
to fit,” appears within the image from
Tool 1 ( P1 ), as shown in Figure 7.70
(page 7–87), along with the Pick & Place panel for that window.