Rockwell Automation 5370-CVIM2 Module - Manual (Page 338)

Chapter 7
Inspection Tools
7–100
•
Fail –– This returns an “error code” when the tool is in a fail condition
and
0.000 for all other conditions. The error code identifies a specific
reason for the failure; for example, error code 1031.000 identifies “No
source image” as the cause of the inspection failure. The complete list of
error codes and fail conditions appears in Appendix A of this manual.
•
Total –– This returns the total number of inspections performed.
•
Faults –– This returns the total number of faults detected.