Rockwell Automation 5370-CVIM2 Module - Manual (Page 489)

5 Chapter Chapter 10
Environment Menu Selections
10–3
Figure 10.3 Example: Selecting the Configuration File Selection Menu
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
If you pick the Environment menu again, you will see the newly selected
device and configuration file in the Config : xx:<filename> line. This
configuration file will used when you place the CVIM2 system online.
When you pick the Variables item in the Environment menu, the
Environment panel appears, as shown in Figure 10.4. Note that the
Variables item is available only for security level 8 users, by default.
Figure 10.4 Example: Selecting the Environment Panel
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
Variables