Rockwell Automation 5370-CVIM2 Module - Manual (Page 528)

Chapter 12
System Security
12–8
Add a New User or Modify an Existing User
When you pick Add/Modify User , the keyboard appears, as shown in
Figure 12.8.
Figure 12.8 Example: Selecting Add/Modify User
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
The title line above the keyboard asks “ Enter new/existing user name .”
This means that you must enter a new name to add a user, or enter an existing
name to modify that user’s password or security level.
Adding a New User
With the keyboard displayed as shown in Figure 12.8, above, use the
following steps to enter a new user.
Enter a new user name on the keyboard. After entering the name, press the
button. When you do, the keyboard reappears with the title line now
asking “ Enter new user password .”
Enter the new user password on the keyboard. After entering the password,
press the
button. When you do, the keyboard reappears, this time with
the title line asking “ Enter new user level .”
After entering the user level, press the button. When you do, the
keyboard will disappear, indicating that the new user was entered
successfully and is stored in the password file.