Rockwell Automation 5370-CVIM2 Module - Manual (Page 438)

Chapter 7
Inspection Tools
7–200
When you pick the Label field in the multiple windows tool edit panel, the
keyboard panel appears, as shown in Figure 7.160.
Figure 7.160 Keyboard Panel
You can use the keyboard to enter an appropriate name or “label” for the
selected sub–window. The label can contain up to eight characters. When you
click the
Enter key to enter the label, the label will appear in the
Sub–Windows Results list box and adjacent to the sub–window. Whenever
you move (“pick and place”) the sub–window, the label will move with it.
This section discusses the expanded inspection results that are available to a
math tool formula from a multiple windows tool. As Figure 7.161 shows, the
expanded inspection results for all tool operations appear in a single scrolling
list.
Figure 7.161 Expanded Results List For Multiple Window Tools in Math Formulas
Execute
Pass
Warn
Fail
Total
Faults
Result
Window#
Label Function
Multiple Windows Tool
Inspection Results and
Math Tool Formulas