Rockwell Automation 5370-CVIM2 Module - Manual (Page 501)

5 Chapter Chapter 10
Environment Menu Selections
10–15
The toolset Adjust panel is similar to the Toolset Edit panel described in
Chapter 4, Inspection Configuration, under the Setting Up Inspection Tools
heading (page 4–20). Note that some of the functions in the
Toolset Edit
panel are unavailable or inactive in the toolset Adjust panel; for example, the
tool name is inactive (shaded type), which signifies that you cannot change
the name in this panel.
The main function of the toolset Adjust panel is to enable you to adjust some
tool parameters while the system remains online and continues to perform
inspections with no loss in speed.
When you pick a tool type field in the toolset Adjust panel (such as
“ Gage ”), the tool Adjust panel for that tool appears, as shown in
Figure 10.17.
Figure 10.17 Example: Selecting a Tool Adjust Panel for the Gage Tool
ЗЗЗЗЗ
ЗЗЗЗЗ
ЗЗЗЗЗ
ЗЗЗЗЗ
Note that the gage tool parameters that are adjustable at this time are
indicated by the active fields and buttons –– the remaining parameters are
adjustable only while the system is in the setup mode.