Rockwell Automation 5370-CVIM2 Module - Manual (Page 29)

Chapter 2
CVIM2 System Configuration: An Overview
2–6
Selecting Image Acquisition Parameters
Your next step, after configuring a toolset, is to pick the button in
the Configuration Editor panel. When you pick this button, the Acquisition
Editor panel appears, as shown in the example in Figure 2.6.
Figure 2.6 Example: The Acquisition Editor Panel
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
The Acquisition Editor panel provides access to all of the parameters and
settings that the system uses to acquire an image for an inspection. The panel
contains two scrolling lists and several buttons, which are described briefly
as follows:
•
Camera 1 – 6 –– The through buttons access the
corresponding Camera setup panels, from which you can perform focus
adjustments, light reference adjustments, and other related functions.
•
Acquisition Systems Settings panel –– The button accesses
the Acquisition System Settings panel, from which you can select a
default camera enable synchronizing the CVIM2 system with external
devices or another CVIM2 system, and/or selecting parameters for
switching between camera banks 1 – 3 and 4 – 6.