Rockwell Automation 5370-CVIM2 Module - Manual (Page 277)

5 Chapter Chapter 7
Inspection Tools
7–39
Figure 7.34 Examples: Selecting Basis for Numbered Displays
A
B
C
In example (A), the “
)” symbol appears on the “
Area ” line. The numbers 1
through 10 identify the objects, on the basis of their area, in ascending order
–– from the smallest to the largest of the 15 objects in the window. In this
example, the smallest object (1) contains 1047 pixels, and the largest object
(10) contains 1246 pixels. The areas of objects 2 through 9 lie between these
two values.
In example (B), the “
*” symbol appears on the “
Area ” line. The numbers 1
through 10 identify the objects on the basis of their area –– in descending
order –– from the largest to the smallest. In this example, the largest object
(1) contains 1309 pixels, and the smallest (10) contains 1080 pixels. The