Rockwell Automation 5370-CVIM2 Module - Manual (Page 40)

3 Chapter
3–1
Image Acquisition Parameters
This chapter discusses the details of selecting the appropriate image
acquisition parameters in preparation for configuring the inspection tools.
NOTE: During the inspection configuration process, you would normally
access the image acquisition parameters through the
button in the
Configuration Editor panel (see Chapter 4, Inspection Configuration; page
4–7). However, you can also access these parameters from the main menu
bar through the
Editors menu, as described in this chapter.
When you pick Acquisition in the Editors menu, the Acquisition Editor
panel appears, as shown by the example in Figure 3.1.
Figure 3.1 Example: Selecting the Acquisition Editor Panel
Main menu
bar
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
The Acquisition Editor panel provides access to all of the parameters and
settings that the system uses to acquire an image for an inspection. The panel
contains two scrolling lists and several buttons, which are described briefly
as follows:
•
Camera 1 – 6 –– The through buttons access the
corresponding Camera setup panels, from which you can perform focus
adjustments, light reference adjustments, and other related functions.