Led outputs – Rockwell Automation 5370-CVIM2 Module User Manual

Page 480

Text mode
Original mode

Advertising

Chapter

Chapter 9

Discrete I/O Assignments

9–17

LED Outputs

is the third of the four

Discrete I/O

devices. You can select it

as shown in Figure 9.11.

Figure 9.11 Selecting the LED Outputs Panel

ЗЗЗЗЗЗ

When the

LED Outputs

format is on the monitor screen, only the top two

rows of the table are available for status LED assignments. The LED outputs
assigned in this panel are routed to the

Status 1

and

Status 2

indicator

LEDs on the CVIM2 front panel.

For information about assigning outputs to the two status LEDs, refer to the
Output Selections section on page 9–9. You can select output signals from
the same

Output Signals

menu shown in Figure 9.5 (page 9–9).

LED Outputs

Advertising