Rockwell Automation 5370-CVIM2 Module - Manual (Page 214)

5 Chapter Chapter 6
Reference Tools
6–55
Figure 6.44 illustrates the initial image of the circular object, the index mark
on the circular object, and the rectangular object.
Figure 6.44 Initial Image for Rotation Finder Tool Example
Circular
object
Rectangular
object
Index
mark
Figure 6.45 illustrates the relation between the reference line tool, rotation
finder tool, and gage tool in the toolset edit panel. In this example, the
rotation finder tool (
Tool 2 ) receives X– and Y–axis shift compensation from
the reference line tool ( Tool 1 ), and the gage tool ( Tool 3 ) receives rotation
and shift compensation from the rotation finder tool.
Figure 6.45 Example: Relation Between Reference Line, Rotation Finder, and Gage
Tools in Toolset Edit Panel