Rockwell Automation 5370-CVIM2 Module - Manual (Page 504)

Chapter 10
Environment Menu Selections
10–18
Figure 10.19 Example: Inspection Results Display Panel
The Results panel contains several columns having the following functions:
•
Name –– This is the name of the tool as listed in the toolset edit panel.
•
Result –– This shows the basic result value from each active tool. It is
updated following each inspection.
•
Faults –– This indicates the number of faults (inspection failures)
accumulated for each active tool during the current online session.
•
Status –– This indicates the “pass,” “fail,” or other status for each tool
following the last inspection cycle.
• n Time –– This indicates the inspection cycle time for each tool.
•
Type –– This indicates the inspection tool type (such as a gage or
window).
•
Operation –– This indicates the inspection operation for which the tool
has been configured.
•
Reference –– This indicates the tool number of the reference tool
providing shift and/or rotation compensation. “
None ” indicates that no
reference tool has been assigned.
The Results panel has two other display functions: The Totals detail panel,
and the Tool Results graphic detail panel. These two panels are described in
the following sections.