Rockwell Automation 5370-CVIM2 Module - Manual (Page 459)

Chapter 8
Thresholds, Filters, and Morphology
8–20
Gray Scale Morphology
As shown in Figure 8.13 (page 8–15), the gray scale selection panel contains
several boxes and a
button.
The boxes in the gray scale selection panel, and the method of selecting the
parameters that they represent, are described briefly as follows:
•
Mode –– Use this box to select either the binary or the gray scale
morphology function for
Morph 1 . Binary is the default mode selection.
When you pick this box, Binary toggles to Gray , or vice versa.
•
Border –– Use this box to select either a black or white inside border for
the window.
Black is the default border selection.
When you pick this box, Black toggles to White , or vice versa.
•
Function –– Use this to select a gray scale function.
•
Max, Min –– Use either or both of these two groups of seven boxes to
configure the gray scale “kernel” structure, which determines, along with
the selected function, the effect of the gray scale morphology processing.
•
Done –– Use the button to save the entries in the gray scale Morph
1 selection panel entries and exit to the Thresh/Filter panel.
When you pick the Function box, the gray scale Function selection panel
appears, as shown in Figure 8.16.
Figure 8.16 Example: Selecting Gray Scale Function Panel
ЗЗ
ЗЗ
ЗЗ
ЗЗ