Rockwell Automation 5370-CVIM2 Module - Manual (Page 172)

5 Chapter Chapter 6
Reference Tools
6–13
NOTE: Wide gages are less likely to detect image features that are narrow
and perpendicular to the gage. Thus, a wide gage can be useful for detecting
wide edges while ignoring dirt or other “noise” along the edge. The width
setting may change the speed of the tool; however, the change in speed is
application dependent.
Pick and Place Function
When you pick the button on the axis configuration panel, the Pick
& Place panel appears, as shown in Figure 6.11, and the pick and place
function is activated. For details about the pick and place function as it
pertains to the reference line tool, refer to Chapter 5, Pick and Place
Functions.
Figure 6.11 Example: Selecting the Pick & Place Panel
ЗЗ
ЗЗ
ЗЗ
ЗЗ
ЗЗ
Threshold Setting Function
For details about the threshold setting functions as they pertain to the
reference line tool, refer to Chapter 8, Thresholds, Filters, and Morphology.