Rockwell Automation 5370-CVIM2 Module - Manual (Page 239)

7 Chapter
7–1
Inspection Tools
This chapter provides detailed information about all CVIM2 inspection tools
(except reference tools), including all configuration considerations that are
unique to the individual tools. Reference tools are discussed in Chapter 6,
Reference Tools.
For information about picking and placing inspection tools, see Chapter 5,
Pick and Place Functions. For information about inspection tool threshold
settings, filter selections, and morphology, see Chapter 8, Threshold, Filters,
and Morphology.
The inspection tools include the following types:
•
Gage tool: line, arc, and circle.
•
Window tool: rectangle, circle, ellipse, arc ring, and polygon.
•
Image tool: rectangle, quad, perspective, and arc ring.
•
Profile tool: rectangle only.
•
Multiple gage tool: line only.
•
Multiple window tool: rectangle only.
An inspection tool can be selected when the toolset edit panel is on the
screen. This selection path is illustrated by the example in Figure 7.1 (page
7–2).
Note that the toolset edit panel in Figure 7.1 (named “ Toolset 1 Edit ”)
contains no inspection tools initially.
To add an inspection tool to the toolset, pick the (or ) button, as
illustrated by the example in Figure 7.2 (page 7–3). When the Tool Types
panel appears, highlight the appropriate tool type (such as Gage ), then pick
the button. The inspection tool (“ Gage, ” in this example) will then
appear under the “ Type ” heading in the toolset edit panel.
Overview: Inspection Tool
Selection Process