Rockwell Automation 5370-CVIM2 Module - Manual (Page 529)

5 Chapter Chapter 12
System Security
12–9
Modifying an Existing User
With the keyboard displayed as shown in Figure 12.8 (page 12–8) use the
following steps to modify an existing user’s password and/or level.
Enter the existing user name on the keyboard. After entering the name, press
the
button. When you do, the keyboard reappears with the title line
now asking “ Modify existing user password .”
If appropriate, press the button to clear the previous password, then
enter a new user password on the keyboard. After entering the new password,
press the
button. When you do, the keyboard reappears, this time with
the title line asking “ Modify existing user level .”
If appropriate, enter a different user level number. After entering the new
user level number, press the
button. When you do, the keyboard will
disappear, indicating that the existing user’s password and/or user level was
entered successfully and is stored in the password file.
Delete a User
When you pick Delete User , the keyboard appears, as shown in Figure 12.9.
Figure 12.9 Example: Selecting Delete User
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
The title line above the keyboard asks “ Enter user name .” This means that
you must enter an existing name to delete that user from the password file.