Rockwell Automation 5370-CVIM2 Module - Manual (Page 28)

5 Chapter Chapter 2
CVIM2 System Configuration: An Overview
2–5
Figure 2.5 Example: Configuration Editor Panel With Six Inspections
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
When you finish the configuration of at least one toolset (and also select the
image acquisition parameters, as described in the next section), you can exit
the
Configuration Editor panel and return to the main menu bar by picking
the button.
When you place the CVIM2 system online, the system executes the currently
selected configuration file. If the system is powered down, then powered up
again, it will automatically begin online operations using the last selected
configuration file –– in this example, it would use the “
FrontLabel ”
configuration file.
The CVIM2 system can store multiple configuration files in the CVIM2
system’s memory; thus, you can easily change inspection applications by
accessing the
Config Files panel, highlighting (picking) another Config file
name listed in that panel, and then picking the button.
When you return to the Configuration Editor panel, the newly selected
configuration file name will appear in the title bar of that panel.