Rockwell Automation 5370-CVIM2 Module - Manual (Page 299)

5 Chapter Chapter 7
Inspection Tools
7–61
•
Thresh/Filter –– The button activates threshold and/or filter
functions that are appropriate for the selected image tool operation.
•
Done –– When you pick the button, the system exits back to the
toolset edit panel.
*Area of Interest –– The portion of a source image that an image tool
processes is referred to as an area of interest (AOI), and it can be configured
(“picked and placed”) using the
and buttons in the tool
edit panel.
The functions of the data fields and buttons in the tool edit panel are
described in the following discussions of the image tool operations and
supporting functions.
When the Operation field in the tool edit panel is picked, the Image
Operation panel appears, as shown in Figure 7.51.
Figure 7.51 Image Operation Selection Panel
Image arithmetic
operations
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
ЗЗЗЗЗЗ
The Image Operation panel lists the three image tool operation types
referred to earlier. Note that the last six operations are identified as image
arithmetic operations.
You can select a specific image tool operation by picking the circle adjacent
to the operation name, then picking the
button. The tool edit panel
returns with the selected operation name appearing in the Operation field.
The following sections discuss the image tool operations in detail.
Image Tool Operations:
Selection