Rockwell Automation 5370-CVIM2 Module - Manual (Page 415)

5 Chapter Chapter 7
Inspection Tools
7–177
Morphology Filter Selection
The and buttons under the slide bar provide access to
identical morphology selection panels (see Figure 8.13 on page 8–15), from
which you can select gray scale morphology filtering operations. The two
morphology buttons, and the
button, are effective for all threshold
mode selections in the Mode field.
These morphology filter functions are applied to the gray scale image within
the profile window before the profile tool generates the profile image. (For
detailed information about morphology functions, refer to Chapter 8 of this
manual under the following headings: Morphology Function, page 8–13;
Binary Morphology, page 8–16; and Gray Scale Morphology, page 8–20.)
This section discusses the expanded inspection results that are available to a
math tool formula from a profile tool. As Figure 7.144 shows, the expanded
inspection results for a profile tool appear in one list.
Figure 7.144 Expanded Results Lists For Profile Tools in Math Formulas
Execute
Pass
Warn
Fail
Total
Faults
Fail High
Warn High
Warn Low
Fail Low
Result
Ax
Ay
Bx
By
Pmin
Pmax
Samples
Min
Max
Sum
Sum2
Profile Tool Inspection
Results and Math Tool
Formulas