Rockwell Automation 5370-CVIM2 Module - Manual (Page 236)

5 Chapter Chapter 6
Reference Tools
6–77
When all three formulas are entered and saved, and the build reference tool
edit panel reappears, when you then pick the
Nominal field, as shown in
Figure 6.66, the build reference tool uses the three formulas to “learn” the
window tool’s theta angle, and that angle (89.9
°) appears in the
Nominal
field, as shown in (B). (Note that because the X and Y modes are disabled in
this example, their values in the
Nominal field remain 0.)
Figure 6.66 Example: “Learning” Nominal Values for Build Reference Tool
A
B
ЙЙЙЙ
ЙЙЙЙ
ЙЙЙЙ
ЙЙЙЙ
ЙЙЙЙ ЙЙ
ЙЙ
At this point, the configuration process is completed for the build reference
tool in this example. The build reference tool is now ready to supply rotation
compensation to the two gage tools.