Rockwell Automation 5370-CVIM2 Module - Manual (Page 340)

Chapter 7
Inspection Tools
7–102
Figure 7.85 Example: Selecting the Feature Finder Tool Edit Panel
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
ЙЙЙЙЙЙ
The feature finder edit panel (named “ Toolset 1.Tool 2 Edit ” in
Figure 7.85) contains several fields and buttons, which are described briefly,
as follows:
•
Image Name –– This field identifies the name of the currently selected
feature image (or “
No Image ,” if none is selected). When you pick this
field, the Image Manager panel appears, which is used to save or select
an image file for the feature window.
•
Passes –– This field selects either Single Pass or Double Pass , which
is the number of passes the feature window makes through the search
window. When you toggle this field,
Single Pass toggles to Double
Pass , or vice versa.
•
Max. Number –– This field selects the maximum number of features that
the feature finder tool is enabled to recognize.
•
Nominal –– When you pick this field, the currently selected and
configured feature finder tool counts the number of objects in the search
window that match the stored template in the feature window.
•
Pass 1 –– The button selects the First Pass panel, from which
you can select the parameters that the feature window uses to scan the
search window on the first (or only) pass.