Sub-gage operations, Width and kernal functions, Sub–gage operations width and kernel functions – Rockwell Automation 5370-CVIM2 Module User Manual
Page 428
Advertising
Chapter 7
Inspection Tools
7–190
When you pick the
Operation
field in the multiple gages tool edit panel, the
Sub–Gage Operation
selection panel appears, as shown in Figure 7.151.
Figure 7.151
Sub–Gage Operation Selection Panel
These sub–gage operations are identical to those for single gages. For details
about these operations, refer to pages 7–8 to 7–16. (Note: Since all
sub–gage operations use the gray scale gaging mode, ignore all references to
the binary gaging mode.)
When you pick the
Width, Kernel
field in the multiple gages tool edit panel,
the
Gage Width & Kernel
panel appears, as shown in Figure 7.152.
Figure 7.152 Gage Width & Kernel Panel
Sub–Gage Operations
Width and Kernel Functions
Advertising