Rockwell Automation 5370-CVIM2 Module - Manual (Page 138)

Chapter 5
Pick and Place Function
5–8
When you select a rectangular window shape and then pick the
button in the window tool edit panel, the rectangular window
Pick & Place
panel appears, as shown in Figure 5.7.
Figure 5.7 Example: Pick and Place Panel for Rectangular Window
The rectangular window Pick & Place panel contains the following data
display fields and buttons:
•
X Loc; Y Loc –– These two fields display, respectively, the current X and
Y coordinates of the upper–left corner of the rectangular window.
•
Length –– This field displays the window length (X–axis) in pixels.
•
Height –– This field displays the window height (Y–axis) in pixels.
•
Arrow buttons,
↑, ↓, ←, and → –– When you pick an arrow button, by
default the entire window moves one pixel in the direction of the
corresponding arrow. If, however, you have just picked and placed one
corner of the window, the arrow buttons will affect that part of the
window only.
•
Done –– When you have set the window position and size as required for
the application, pick the
button to exit the pick and place function
and return to the tool edit panel.
Rectangular Windows