Rockwell Automation 5370-CVIM2 Module - Manual (Page 383)

5 Chapter Chapter 7
Inspection Tools
7–145
Figure 7.116 Example: Selecting “Area” Formula For Multiple Operation
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗ
After the button is picked and the formula entry keyboard exited, the
Loops field in the math tool edit panel must be set to 15 in order to “loop”
through the formula up to 15 times.
When the Nominal field is picked, the math tool “learns” the number of
objects whose area has been generated, and this value appears in the field, as
shown in Figure 7.117. Note that in this example the number is 14, one less
than the number allowed by the
Loops setting of 15.
Figure 7.117 Example: “Learning” the Number of Objects
ЗЗЗЗЗЗЗЗЗ
ЗЗЗЗЗЗЗЗЗ
Next, when the button is picked, the Math Values panel appears, as
shown in Figure 7.118 (page 7–146).