Rockwell Automation 5370-CVIM2 Module - Manual (Page 533)

5 Chapter Chapter 12
System Security
12–13
Changing Access Privilege Levels
The process for setting up a privilege change is the same as for changing
menu and button text fields. Thus, if the privilege level for “
File ” (see
Figure 12.11, page 12–12) is to be changed to include Level 6, the Level 6
selector must be picked as shown by the example in Figure 12.12.
Figure 12.12 Example: Changing Privilege Level
ЗЗЗЗЗ
ЗЗЗЗЗ
ЗЗЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
Note that initially Level 8 is selected in the Privilege box, while in the
Privilege Bit Mask section, only Bit 8 is a “1.” Together, these indicate that
by default only a person with a Level 8 access (the system administrator) has
access to “
File ” from the main menu bar.
When you pick the Level 6 selector, Bit 8, Bit 7, and Bit 6 are all “1.” By
default, whenever you select a level below Level 8 in the Privilege box, the
levels above will become (or remain) “1,” which means that the selected
level and all higher users will have Level 8 access (to “
File ” in the main
menu bar, in this case).