Rockwell Automation 5370-CVIM2 Module - Manual (Page 144)

Chapter 5
Pick and Place Function
5–14
When you select an circular window and then pick the button in
the window edit panel, the window color changes from red to green, and the
Pick & Place panel appears, as shown in Figure 5.13.
Figure 5.13 Example: Pick and Place Panel for Circular Window
The circular window Pick & Place panel contains the following data display
fields and buttons:
•
X Cen; Y Cen –– These two fields display, respectively, the current X
and Y coordinates of the center of the circular window.
•
Radius –– This field displays the window radius, in pixels.
•
Arrow buttons,
↑, ↓, ←, and → –– When you pick an arrow button, by
default the entire window moves one pixel in the direction of the
corresponding arrow. If, however, you have just picked and placed one
side of the window, the arrow buttons will affect that part of the window
only.
•
Done –– When you have set the window position and size as required for
the application, pick the
button to exit the pick and place function
and return to the tool edit (or adjust) panel.
Circular Windows