Rockwell Automation 5370-CVIM2 Module - Manual (Page 24)

2 Chapter
2–1
CVIM2 System Configuration: An Overview
This chapter discusses the basic phases of system configuration and the
major configuration functions in each phase. The details of the inspection
configuration process are provided in Chapter 3, Image Acquisition
Parameters, and Chapter 4, Inspection Configuration.
The discussions that follow assume that all CVIM2 system parameters are set
to their out–of–box default state. They also assume that you are already
familiar with the CVIM2 user interface and with using the light pen and/or
mouse to “navigate” the user interface.
After a normal powerup, the monitor screen displays the CVIM2 “banner
message,” as shown in Figure 2.1.
Figure 2.1 Example: Monitor Screen After Normal Powerup
Main menu
bar
Note that the banner message indicates the current series and firmware
revision levels of the CVIM2 system. Along the top margin is the main menu
bar.
After System Powerup