Rockwell Automation 5370-CVIM2 Module User Manual
Page 260
![background image](/manuals/580351/260/background.png)
Chapter 7
Inspection Tools
7–22
Max F. Object
The maximum foreground object feature mode enables you to specify an edge
from among the following points on the gage:
•
The first edge (offset
0.0
) of the maximum–size foreground object.
•
The midpoint (
Center
) between the first edge and the last edge of the
maximum–size foreground object.
Max B. Object
The maximum background object feature mode enables you to specify an
edge from among the following points on the gage:
•
The first edge (offset
0.0
) of the maximum–size background object.
•
The midpoint (
Center
) between the first edge and the last edge of the
maximum–size background object.
Figure 7.22 uses a linear gage and the binary gaging mode to illustrate all
three of the “object” feature mode selections.
Figure 7.22 Example: Three Object Feature Modes
Midpoint
First
edge
Maximum object
and maximum
background object
Maximum
foreground object