Rockwell Automation 5370-CVIM2 Module User Manual
Page 125
Advertising
![background image](/manuals/580351/125/background.png)
5
Chapter
Chapter 4
Inspection Configuration
4–39
When you return again to setup display or online operations, the newly
altered window will appear correctly positioned over the workpiece image as
shown in Figure 4.31.
Figure 4.31 Example: Altered Window Shifted and Rotated
Each time you enter the toolset edit panel, the
Register
function will be
restored to its default setting, as specified in the
Display
panel (see the
Selecting Display Parameters section of this chapter, on page 4–16, for
details).
Advertising